Extend the Windows 7 Trial from 30 to 120 Days

Extend the Windows 7 Trial from 30 to 120 Days

Did you know that you can install Windows 7 without any license key and use it for 30 days? What you might not know is that you can also extend that trial mode to 120 days, without requiring a key.
The basic way this works is that at the end of the 30 days, you’ll need to run a small command and reboot your computer, at which point you’ll have 30 more days, up to a maximum of 120 days. This trick should work regardless of where you got your copy of Windows 7 from.
Note: make sure to check out our screenshot walkthrough of the Windows 7 Beta if you haven’t already, because Microsoft is giving away beta keys that don’t expire until August 1st.
Extending the Trial By 30 Days
The first thing you’ll want to do is check how many days are left in your trial period. You can do this by right-clicking Computer and choosing Properties…

Read More

Performance tips for Windows XP

1. Optimize your paging file
Windows XP uses a paging file on your hard disk to store information when the amount of available RAM memory isn't sufficient to hold all the data that is being processed. For instance, when you are working on a very large Word document that is too big to fit in your computer's RAM, Windows XP starts swapping part of it's data in and out the paging file on your hard disk.

Hard disk access is typically a lot slower than RAM access, that's why you should optimize your paging file.

Click the Start button, right click "My Computer" and select "Properties"
Select the "advanced" tab
Under "Performance" click on the "Settings" button
Again, select the "advanced" tab
Under "Virtual Memory" click on the "Change" button
Windows will then show the available hard drives in your computer and the paging file settings for each drive. If you have more than one hard disk, you should place your paging file on another disk than the system disk (where Windows is installed).

That is to avoid contention on the disk controller when Windows is working with system files and the paging file simultaneously.

Usually the system disk is C:, so select any other disk if you have one and then check the "Custom size" radio button. Type in the same value for "Initial size" and "Maximum size", so that Windows doesn't need time to resize the paging file while you are working with your computer. Microsoft recommends about 1.5 times the amount of RAM in your computer. Click the "Set" button to commit the changes you have made.

It is possible to have multiple paging files on multiple disks, but try to avoid having a paging file on your system disk. Just select that disk and select the "No paging file" radio button.

2. Optimize display settings
A lot of performance tips for Windows XP talk about the overall sexy-ness of Windows XP and the performance price you have to pay for it. If you are working on an older computer and you care more about speed than graphical coolness of the Windows XP interface, you might want to consider toning down the graphics a bit.

Click the Start button, right click "My Computer" and select "Properties"
Select the "advanced" tab
Under "Performance" click on the "Settings" button
Click the "Visual Effects" tab
Select the "Adjust for best performance" radio button and click ok
If this change is too radical for you, you can try experimenting with the different individual settings as well.

3. Indexing service
The indexing service is a program that indexes files on your computer to speed up search results when you perform a search. It usually wakes up and starts doing it's job when your computer is idle. That's the reason why some pc's hard disks often start making a lot of noise when nobody's working on them.

The indexing service is also mentioned in a lot of performance tips for Windows XP, because it can interfere with your work. If you don't perform a lot of file searches on your pc, you might want to disable the indexing service.

Click on the Start button, right click "My Computer" and select "Manage"
In the navigation tree at the left, go to the bottom and click the little "+" sign next to "services and applications"
Select "Services"
In the right Windows pane, scroll to "Indexing service", right click it and select "Properties"
Make sure that "Manual" is selected from the drop-down list under "Startup type"

4. Use the NTFS file system
Performance tips for Windows XP often mention the use of the NTFS file system because it works slightly faster than the FAT32 file system. Besides the performance benefit, you will also enjoy improved stability and security in comparison with the FAT32 file system.

You can convert an existing FAT32 file system to NTFS without data loss, but always remember that older operating systems like Windows 98 cannot work with NTFS.

Proceed with care if you have more than one operating system on your pc.

Click on the Start button, right-click "My Computer" and select "Manage"
In the navigation pane on the left, expand "storage" and choose "Disk Management"
The details on the right will reveal the file system details for each of your drives. Also make a note of the drive's volume name.
To convert a drive's file system :

Click the Start button and select "Run"
Type "convert d: /fs:ntfs" (without the quotes - replace d: with the drive letter that you want to convert) and click ok
A dos box will open and ask for the drive's volume name
Enter the volume name and hit the ENTER key
Windows will start the conversion to NTFS and notifies you when it is finished.

Read More

How to speedup windows XP

Disable unused startup programs.

When you boot your computer, so many programs start with windows XP just

like scheduler TV,Adobe gama loader,PDF updater,Blue tooth,pc suit

phone,antiviruses and other defaults programs essentials to run XP.So many

programs not essential.Windows XP runs with minimum programs. If you

bypass some less important programs then it is possible XP boot fastly.

1. Go to start button – Run

2. Type `msconfig.exe``

3. Click on OK button.

4. A system configuration utility window show up.

5. Click on start up TAB.

6. You will see several boxes and some of them will selected uncheck item unused. Do not uncheck antivirus.

7. Restart computer and after restarting check the box of dialogue window and close.

2. Remove spyware ,adware and malware

If your system infected with above , your system speed become very

Slow, because they generates popup ads, send spam emails, interfere

with good programs.

3. Optimize display settings.

1. click the start button.

2. Select control panel.

3. Double click on system icon.

4. Click on advanced tab.

5. Leave only the following ticked

- Show Shadows under menus.

- Show shadows under mouse pointer.

- Show translucent selection rectangle.

- Use drop shadows for icons and labels on the desktop.

- Use visual styles on windows and buttons.

- Clicks on apply and OK

4. Speed up file browsing.

When you open my computer and browse folder then you noticed that

slightly delay, because folder windows XP automatically searches for

network files and printers. To fix this and increase browsing speed.

1. Double click –my computer .

2. Click the Tool menu.

3. Select folder options.

4. Click on the view tab.

5. Uncheck the automatically search for network folders and printers check box.

6. Click apply.

7. click OK.

8. Reboot system.

5. Reduce page file size.

Page size is not constant by default .Due to this the operating system has to resize the file each time more space is required.

1. Right click my computer , select properties.

2. Click the advanced tab.

3. Click the settings tab.

4. Click the advanced tab.

5. Under virtual memory section click the change button.

6. Click on virtual memory.

7. Highlight C: drive.

8. Select the custom size and put some values as per your size of RAM memory.

9. Click on set then OK buttons and apply changes.

6. Clean your system registry.

So many registry cleaner program available on net.With the help of this clean

the registry .Before clean registry, don`t forget to take backup of registry.

7. Run disk clean up .

1. Double click the my computer icon.

2. Right click on C: drive

3. select properties.

4. Click the disk cleanup button.

5. Select temporary internet files and recycle bin.

6. Click on OK.

8. Enable direct memory access (DMA).

1. Right click on my computer ,select properties

2. Select hardware tab.

3. Click the device manager button.

4. double click IDE/ATAPI controllers.

5. Double click on primary IDE channel.

6. Click on advanced setting tab.

7. Set the transfer mode to DMA if available both for device I and O.

8. Click OK.

9. Disable file indexing.

Indexing service program consume large amount of memory.

1. Click start button.

2. Select the control panel.

3. Double click add/remove program.

4. Click the add/remove window components icon on the left side window.

5. This may take a few seconds to load.

6. look for the indexing services component in the list.

7. Uncheck the indexing services.

8. click next.

9. click finish.

10 Remove unused program.

- Remove unused program through control panel add remove program.

Read More

Reset forgotten Windows admin password: How to reset forgotten Windows administrator password?

Forgot windows password? Forget administrator password? No, problem. Windows will not angry, if you forgot administrator password of Windows. You can really reset, windows administrative password easily. This page contains information to reset windows administrator password. Just follow the steps and you will be able to reset Windows administrator password.
How to reset forgotten Windows administrator password?

Follow the following steps to reset forgotten Windows administrator password:
Step 1: Boot up your computer with Windows CD

Take a boot-able windows CD.
Insert the CD into your computer CD-ROM or DVD-ROM.
Boot your computer with that Windows CD like you are doing the same as the installation of Windows.
Within few seconds, you will see the message Press any key to boot from CD and press any key.

Step 2: Wait until the Repair window is prompted

Wait until you see you are prompted from one of the two options: Install Windows or Repair Windows.

Step 3: Repair mode selection

Press R key of your keyboard and the setup will start copying files from the CD to computer hard drive.
Please wait for some time and don't do anything.
Windows will reboot automatically.

You may be interested

How to get rid of Windows Security Alerts?
How to Minimize Startup Time for Windows?
An Extensive List of Antivirus Removal Tools or Unin...
Seven Hacks And Tweaks for Your Computer Sanity
Maximize Windows Performance
Quick Fixing to Make Your Slow Windows Computer Fast...

Step 4: Accessing to the command prompt

After restarting your computer, the Graphical User Interface screen of Windows will be shown.
Go to the command prompt by pressing the following key:

For Windows 2000 users:

You have to wait until you see the setup line like Registering Component.
When you see "Registering Component", press Shift+ F10 keys together of your computer keyboard.
After the following steps, you will access to the command prompt.

For Windows XP users:

You have to wait until you see the line like Installing devices.
When you see "Installing devices", press Shift+ F10 keys together of your computer keyboard.
After the following steps, you will access to the command prompt.

By following the above steps you can easily reset Windows administrator password. If you face any difficulties, you may ask in the comment section. Hope, you success.

© Written by rancidTaste
Step 5: Accessing the control panel

Now, you have to access control panel from the command prompt. You can access the command prompt by the following ways:

For windows 2000 users:

Type control.exe in the command prompt and hit Enter key.

For windows XP users:

Type nusrmgr.cpl in the command prompt and hit Enter key.

Step 6: Password resetting

After the above steps, you have access to the control panel. Now you can easily reset administrator password or set new password using the control panel administration/ password utilities.
When you have completed resetting the password, close the command prompt.
Wait unlit the repair is finished.
Restart your computer and now log in with the new password.

Read More

Very Useful Tips in Windows Xp

Very Useful Tips in Windows Xp

(1). To Break Password in Windows Xp Logon.....

I will tell you the simple procedure to delete the sam file(to delete the password).

what you have to do is start your computer in command promt.

And go into C: (assuming c: is ur drive where window is store.)

And type [cd windows]press enter.

(if u r using win2000 then type [cd winnt] instead of [cd windows]).

Then type [cd system32]enter.

Then [cd config]enter.

Then type [del sam].

And reboot your system.

Heres your password is deleted and you will be able to logon without password.

It will surely work just try it.

Any trouble asks.

(2). To Break Bios Password

Basic BIOS password crack - works 9.9 times out of ten.

This is a password hack but it clears the BIOS such that the next time you start the PC, the CMOS does not ask for any password. Now if you are able to bring the DOS prompt up, then you will be able to change the BIOS setting to the default. To clear the CMOS do the following:


Get DOS prompt and type:


DEBUG hit enter

-o 70 2e hit enter

-o 71 ff hit enter

-q hit enter

exit hit enter


Restart the computer.

It works on most versions of the AWARD BIOS.


(3). To Hide your folders in XP without any Software.

Hide your Folder in XP without any Software

Generally we use 3rd party software to hide any file in Windows.

Also the Folder Options>>Hide All Files and Folder is a very weak method to hide files.

A Strong method under Windows XP is also there which allows you to hide a folder without anybody seeing it and it does not require a password also. It is the best possible hideout that Windows can give your folder.

First create a new folder somewhere on your hard drive,

when you name it hold down “Alt” and press “0160?

This will create an invisible space so it will appear as if it has no name.

Then right click in and select “Properties” select the tab “customize” and

select “change icon”.

Scroll along and you should find a few blank spaces.

Click on any one and click ok.

The folder will be invisible to hide all your personal files….

Alt+255 also work. Now you can even make it a hidden folder by going to its properties and now you have a hidden folder.

Read More

useful Windows tricks

4 useful Windows tricks

You know that feeling you get when your friends or family see you do something on your computer that they've never seen before? If you’ve had this experience, you know that “world's coolest power-user” feeling. But if you haven’t, start here. Knowledge is power!

Read these six tips for Windows 7, Windows Vista, and Windows XP that will keep you schoolin' your friends and family.
1. Don't just maximize your windows—go full screen

When you need a really big window for viewing photos and videos, don't just maximize it: go full screen! This tip works great for viewing photos and videos at maximum size in Windows Explorer or Windows Media Player, utilizing screen space usually occupied by the header at the top of the screen and the taskbar at the bottom. Here’s how:

Open any photo in Windows Explorer, or open a photo or video clip in Windows Media Player. Do one of the following:

In Windows 7 and Windows XP, click the F11 key at the top of your keyboard.

The photo or video image enlarges to its maximum size and the title bar and taskbar are hidden.

Viewing a photo in Windows Explorer standard view
To undue full-screen mode and restore the window to its normal view, press the Esc (Escape) key at the top of your keyboard

2. Customize the Navigation pane

You can use the navigation pane (the left pane) to find files and folders and display links to frequently used folders and other items. You can also move or copy items to a destination in the navigation pane.

If you don't see the navigation pane on the left side of an open folder window, click Organize, point to Layout, and then click Navigation pane to display it.
To customize the navigation pane in Windows 7

In an open folder or library window, click Organize, and then click Folder and search options.

In the Folder Options dialog box, click the General tab, and then do one or both of the following:

To show all the folders on your computer in the navigation pane, including your personal folder, select the Show all folders check box, click Apply to see the change, and then click OK.

To automatically expand the navigation pane to the folder that's selected in the folder window, select the Automatically expand to current folder check box, and then click OK.

Customizing the navigation pane in Windows 7

More ways to customize your favorites in Windows 7

To add a folder, a saved search, a library, or even a drive as a favorite, drag it to the Favorites section in the navigation pane. Note: You can’t add individual file to Favorites, but you can add them to any folder in Favorites.

To change the order of favorites, drag a favorite to a new position in the list.

To restore the default favorites in the navigation pane, right-click Favorites, and then click Restore Favorite Links.

To view the folder where your favorites are stored, click Favorites in the navigation pane. Favorites are stored as shortcuts.

To remove a favorite, right-click the favorite, and then click Remove. This removes the favorite from the navigation pane—it doesn't delete the files or folders that the shortcut points to.

The Favorites area of the navigation pane in Windows 7

Add folders and files in Windows Vista

In Windows Vista, you can add folders to Favorite Links in the navigation pane so that you can open them from any folder window at any time. To do this, first open the folder that contains the subfolder you want to add. Then simply drag its icon from the original folder to where you want it in the navigation pane. You can also click Folders at the bottom of the pane and drag a folder from the folder list up into the Favorite Links section of the pane. Note: You can’t add individual files to Favorite Links, but you can add them to any folder in Favorite Links.

3. Pin a program or items to the Windows 7 taskbar

You know what would make a great taskbar? One where you could pin your favorite applications or files so that you could open them quickly from any window at any time. Guess what? You can.

In Windows 7, you can also pin shortcuts for favorite or frequently used files, folders, and websites to the Jump Lists for each of those programs to the taskbar.

Pin a program to the taskbar

To pin a program shortcut to the taskbar, do one of the following:

If the program is already running, right-click the program's button on the taskbar (or drag the button toward the desktop) to open the program’s Jump List, and then click Pin this program to taskbar.

Or if the program isn't running, click Start, find the program’s icon, right-click the icon, and then click Pin to Taskbar.

You can also pin a program by dragging the program's shortcut from the desktop or Start menu to the taskbar.

6 useful Windows tricks

You know that feeling you get when your friends or family see you do something on your computer that they've never seen before? If you’ve had this experience, you know that “world's coolest power-user” feeling. But if you haven’t, start here. Knowledge is power!

Read these six tips for Windows 7, Windows Vista, and Windows XP that will keep you schoolin' your friends and family.
1. Don't just maximize your windows—go full screen

When you need a really big window for viewing photos and videos, don't just maximize it: go full screen! This tip works great for viewing photos and videos at maximum size in Windows Explorer or Windows Media Player, utilizing screen space usually occupied by the header at the top of the screen and the taskbar at the bottom. Here’s how:

Open any photo in Windows Explorer, or open a photo or video clip in Windows Media Player. Do one of the following:

In Windows 7 and Windows XP, click the F11 key at the top of your keyboard.

The photo or video image enlarges to its maximum size and the title bar and taskbar are hidden.
Viewing a photo in Windows Explorer standard view

Viewing a photo in Windows Explorer standard view

To undue full-screen mode and restore the window to its normal view, press the Esc (Escape) key at the top of your keyboard
2. Customize the Navigation pane

You can use the navigation pane (the left pane) to find files and folders and display links to frequently used folders and other items. You can also move or copy items to a destination in the navigation pane.

If you don't see the navigation pane on the left side of an open folder window, click Organize, point to Layout, and then click Navigation pane to display it.
To customize the navigation pane in Windows 7

In an open folder or library window, click Organize, and then click Folder and search options.

In the Folder Options dialog box, click the General tab, and then do one or both of the following:

To show all the folders on your computer in the navigation pane, including your personal folder, select the Show all folders check box, click Apply to see the change, and then click OK.

To automatically expand the navigation pane to the folder that's selected in the folder window, select the Automatically expand to current folder check box, and then click OK.

Customizing the navigation pane in Windows 7

Customizing the navigation pane in Windows 7
More ways to customize your favorites in Windows 7

To add a folder, a saved search, a library, or even a drive as a favorite, drag it to the Favorites section in the navigation pane. Note: You can’t add individual file to Favorites, but you can add them to any folder in Favorites.

To change the order of favorites, drag a favorite to a new position in the list.

To restore the default favorites in the navigation pane, right-click Favorites, and then click Restore Favorite Links.

To view the folder where your favorites are stored, click Favorites in the navigation pane. Favorites are stored as shortcuts.

To remove a favorite, right-click the favorite, and then click Remove. This removes the favorite from the navigation pane—it doesn't delete the files or folders that the shortcut points to.

The Favorites area of the navigation pane in Windows 7

The Favorites area of the navigation pane in Windows 7
Add folders and files in Windows Vista

In Windows Vista, you can add folders to Favorite Links in the navigation pane so that you can open them from any folder window at any time. To do this, first open the folder that contains the subfolder you want to add. Then simply drag its icon from the original folder to where you want it in the navigation pane. You can also click Folders at the bottom of the pane and drag a folder from the folder list up into the Favorite Links section of the pane. Note: You can’t add individual files to Favorite Links, but you can add them to any folder in Favorite Links.
Pictures folder in Windows

Pictures folder in Windows
3. Pin a program or items to the Windows 7 taskbar

You know what would make a great taskbar? One where you could pin your favorite applications or files so that you could open them quickly from any window at any time. Guess what? You can.

In Windows 7, you can also pin shortcuts for favorite or frequently used files, folders, and websites to the Jump Lists for each of those programs to the taskbar. Learn more about Jump Lists.

Pin a program to the taskbar

To pin a program shortcut to the taskbar, do one of the following:

If the program is already running, right-click the program's button on the taskbar (or drag the button toward the desktop) to open the program’s Jump List, and then click Pin this program to taskbar.

Or if the program isn't running, click Start, find the program’s icon, right-click the icon, and then click Pin to Taskbar.

You can also pin a program by dragging the program's shortcut from the desktop or Start menu to the taskbar.

Pinning a program to the taskbar

Pinning a program to the taskbar
Using Jump Lists in Windows 7

4. Customize the Quick Launch Bar in Windows XP

In Windows XP, the customizable Quick Launch Bar also gives you convenient shortcuts to your favorite programs, folders, and files. The Quick Launch Bar remains accessible from most windows, so it’s a handy way to open the applications and files you use frequently.

If the Quick Launch Bar isn’t already visible to the right of the Start button Start button, you’ll need to turn it on. To do that, right-click an open area of the taskbar. Hover your mouse pointer over Toolbars, then click Quick Launch. The Quick Launch Bar appears on your taskbar.

6 useful Windows tricks

You know that feeling you get when your friends or family see you do something on your computer that they've never seen before? If you’ve had this experience, you know that “world's coolest power-user” feeling. But if you haven’t, start here. Knowledge is power!

Read these six tips for Windows 7, Windows Vista, and Windows XP that will keep you schoolin' your friends and family.
1. Don't just maximize your windows—go full screen

When you need a really big window for viewing photos and videos, don't just maximize it: go full screen! This tip works great for viewing photos and videos at maximum size in Windows Explorer or Windows Media Player, utilizing screen space usually occupied by the header at the top of the screen and the taskbar at the bottom. Here’s how:

Open any photo in Windows Explorer, or open a photo or video clip in Windows Media Player. Do one of the following:

In Windows 7 and Windows XP, click the F11 key at the top of your keyboard.

The photo or video image enlarges to its maximum size and the title bar and taskbar are hidden.
Viewing a photo in Windows Explorer standard view

Viewing a photo in Windows Explorer standard view

To undue full-screen mode and restore the window to its normal view, press the Esc (Escape) key at the top of your keyboard
2. Customize the Navigation pane

You can use the navigation pane (the left pane) to find files and folders and display links to frequently used folders and other items. You can also move or copy items to a destination in the navigation pane.

If you don't see the navigation pane on the left side of an open folder window, click Organize, point to Layout, and then click Navigation pane to display it.
To customize the navigation pane in Windows 7

In an open folder or library window, click Organize, and then click Folder and search options.

In the Folder Options dialog box, click the General tab, and then do one or both of the following:

To show all the folders on your computer in the navigation pane, including your personal folder, select the Show all folders check box, click Apply to see the change, and then click OK.

To automatically expand the navigation pane to the folder that's selected in the folder window, select the Automatically expand to current folder check box, and then click OK.

Customizing the navigation pane in Windows 7

Customizing the navigation pane in Windows 7
More ways to customize your favorites in Windows 7

To add a folder, a saved search, a library, or even a drive as a favorite, drag it to the Favorites section in the navigation pane. Note: You can’t add individual file to Favorites, but you can add them to any folder in Favorites.

To change the order of favorites, drag a favorite to a new position in the list.

To restore the default favorites in the navigation pane, right-click Favorites, and then click Restore Favorite Links.

To view the folder where your favorites are stored, click Favorites in the navigation pane. Favorites are stored as shortcuts.

To remove a favorite, right-click the favorite, and then click Remove. This removes the favorite from the navigation pane—it doesn't delete the files or folders that the shortcut points to.

The Favorites area of the navigation pane in Windows 7

The Favorites area of the navigation pane in Windows 7
Add folders and files in Windows Vista

In Windows Vista, you can add folders to Favorite Links in the navigation pane so that you can open them from any folder window at any time. To do this, first open the folder that contains the subfolder you want to add. Then simply drag its icon from the original folder to where you want it in the navigation pane. You can also click Folders at the bottom of the pane and drag a folder from the folder list up into the Favorite Links section of the pane. Note: You can’t add individual files to Favorite Links, but you can add them to any folder in Favorite Links.
Pictures folder in Windows

Pictures folder in Windows
3. Pin a program or items to the Windows 7 taskbar

You know what would make a great taskbar? One where you could pin your favorite applications or files so that you could open them quickly from any window at any time. Guess what? You can.

In Windows 7, you can also pin shortcuts for favorite or frequently used files, folders, and websites to the Jump Lists for each of those programs to the taskbar. Learn more about Jump Lists.

Pin a program to the taskbar

To pin a program shortcut to the taskbar, do one of the following:

If the program is already running, right-click the program's button on the taskbar (or drag the button toward the desktop) to open the program’s Jump List, and then click Pin this program to taskbar.

Or if the program isn't running, click Start, find the program’s icon, right-click the icon, and then click Pin to Taskbar.

You can also pin a program by dragging the program's shortcut from the desktop or Start menu to the taskbar.

Pinning a program to the taskbar

Pinning a program to the taskbar
Using Jump Lists in Windows 7
4. Customize the Quick Launch Bar in Windows XP

In Windows XP, the customizable Quick Launch Bar also gives you convenient shortcuts to your favorite programs, folders, and files. The Quick Launch Bar remains accessible from most windows, so it’s a handy way to open the applications and files you use frequently.

If the Quick Launch Bar isn’t already visible to the right of the Start button Start button, you’ll need to turn it on. To do that, right-click an open area of the taskbar. Hover your mouse pointer over Toolbars, then click Quick Launch. The Quick Launch Bar appears on your taskbar.
The Quick Launch Bar on the Windows XP taskbar

The Quick Launch Bar on the Windows XP taskbar

To add a program shortcut to the Quick Launch Bar, click the Start buttonStart button, click All Programs, then click and drag the application you want to the Quick Launch Bar. Release the mouse button and the application’s icon appears in the Quick Launch Bar.

To add a folder or file shortcut to the Quick Launch Bar, open Windows Explorer, navigate to the folder, subfolder, or individual file you want, click and drag the folder or file you want to the Quick Launch Bar. Release the mouse button and the icon for the folder or file appears in the Quick Launch Bar.

To remove a shortcut from the Quick Launch Bar, right-click on the icon in the Quick Launch Bar of the application, folder, or file you want to remove and right-click it, click Delete, and then click Yes when asked if you’re sure you want to delete the shortcut. Note: Although the shortcut is removed from the Quick Launch Bar, the actual application, folder, or file has not been deleted from your computer.
5. Arrange windows on your desktop

In Windows, you can arrange windows side by side, which can be especially helpful when comparing two documents or when moving files from one place to another. Note: If you’re using a nonstandard setup (such as dual monitors), the tricks below may not work as expected.
Windows 7

Drag the title bar of a window to the left or right side of the screen until an outline of the expanded window appears.

Release the mouse to expand the window.

Repeat steps 1 and 2 with another window to arrange the windows side by side.

To return a window to its original size click the Maximize button in the window’s title bar and the window expands to full size.

Tip: To snap an active window to the side of the desktop by using the keyboard, press Windows logo key Windows logo key +Left Arrow or Windows logo key Windows logo key +Right Arrow.

6 useful Windows tricks

You know that feeling you get when your friends or family see you do something on your computer that they've never seen before? If you’ve had this experience, you know that “world's coolest power-user” feeling. But if you haven’t, start here. Knowledge is power!

Read these six tips for Windows 7, Windows Vista, and Windows XP that will keep you schoolin' your friends and family.
1. Don't just maximize your windows—go full screen

When you need a really big window for viewing photos and videos, don't just maximize it: go full screen! This tip works great for viewing photos and videos at maximum size in Windows Explorer or Windows Media Player, utilizing screen space usually occupied by the header at the top of the screen and the taskbar at the bottom. Here’s how:

Open any photo in Windows Explorer, or open a photo or video clip in Windows Media Player. Do one of the following:

In Windows 7 and Windows XP, click the F11 key at the top of your keyboard.

The photo or video image enlarges to its maximum size and the title bar and taskbar are hidden.
Viewing a photo in Windows Explorer standard view

Viewing a photo in Windows Explorer standard view

To undue full-screen mode and restore the window to its normal view, press the Esc (Escape) key at the top of your keyboard
2. Customize the Navigation pane

You can use the navigation pane (the left pane) to find files and folders and display links to frequently used folders and other items. You can also move or copy items to a destination in the navigation pane.

If you don't see the navigation pane on the left side of an open folder window, click Organize, point to Layout, and then click Navigation pane to display it.
To customize the navigation pane in Windows 7

In an open folder or library window, click Organize, and then click Folder and search options.

In the Folder Options dialog box, click the General tab, and then do one or both of the following:

To show all the folders on your computer in the navigation pane, including your personal folder, select the Show all folders check box, click Apply to see the change, and then click OK.

To automatically expand the navigation pane to the folder that's selected in the folder window, select the Automatically expand to current folder check box, and then click OK.

Customizing the navigation pane in Windows 7

Customizing the navigation pane in Windows 7
More ways to customize your favorites in Windows 7

To add a folder, a saved search, a library, or even a drive as a favorite, drag it to the Favorites section in the navigation pane. Note: You can’t add individual file to Favorites, but you can add them to any folder in Favorites.

To change the order of favorites, drag a favorite to a new position in the list.

To restore the default favorites in the navigation pane, right-click Favorites, and then click Restore Favorite Links.

To view the folder where your favorites are stored, click Favorites in the navigation pane. Favorites are stored as shortcuts.

To remove a favorite, right-click the favorite, and then click Remove. This removes the favorite from the navigation pane—it doesn't delete the files or folders that the shortcut points to.

The Favorites area of the navigation pane in Windows 7

The Favorites area of the navigation pane in Windows 7
Add folders and files in Windows Vista

In Windows Vista, you can add folders to Favorite Links in the navigation pane so that you can open them from any folder window at any time. To do this, first open the folder that contains the subfolder you want to add. Then simply drag its icon from the original folder to where you want it in the navigation pane. You can also click Folders at the bottom of the pane and drag a folder from the folder list up into the Favorite Links section of the pane. Note: You can’t add individual files to Favorite Links, but you can add them to any folder in Favorite Links.
Pictures folder in Windows

Pictures folder in Windows
3. Pin a program or items to the Windows 7 taskbar

You know what would make a great taskbar? One where you could pin your favorite applications or files so that you could open them quickly from any window at any time. Guess what? You can.

In Windows 7, you can also pin shortcuts for favorite or frequently used files, folders, and websites to the Jump Lists for each of those programs to the taskbar. Learn more about Jump Lists.

Pin a program to the taskbar

To pin a program shortcut to the taskbar, do one of the following:

If the program is already running, right-click the program's button on the taskbar (or drag the button toward the desktop) to open the program’s Jump List, and then click Pin this program to taskbar.

Or if the program isn't running, click Start, find the program’s icon, right-click the icon, and then click Pin to Taskbar.

You can also pin a program by dragging the program's shortcut from the desktop or Start menu to the taskbar.

Pinning a program to the taskbar

Pinning a program to the taskbar
Using Jump Lists in Windows 7
4. Customize the Quick Launch Bar in Windows XP

In Windows XP, the customizable Quick Launch Bar also gives you convenient shortcuts to your favorite programs, folders, and files. The Quick Launch Bar remains accessible from most windows, so it’s a handy way to open the applications and files you use frequently.

If the Quick Launch Bar isn’t already visible to the right of the Start button Start button, you’ll need to turn it on. To do that, right-click an open area of the taskbar. Hover your mouse pointer over Toolbars, then click Quick Launch. The Quick Launch Bar appears on your taskbar.
The Quick Launch Bar on the Windows XP taskbar

The Quick Launch Bar on the Windows XP taskbar

To add a program shortcut to the Quick Launch Bar, click the Start buttonStart button, click All Programs, then click and drag the application you want to the Quick Launch Bar. Release the mouse button and the application’s icon appears in the Quick Launch Bar.

To add a folder or file shortcut to the Quick Launch Bar, open Windows Explorer, navigate to the folder, subfolder, or individual file you want, click and drag the folder or file you want to the Quick Launch Bar. Release the mouse button and the icon for the folder or file appears in the Quick Launch Bar.

To remove a shortcut from the Quick Launch Bar, right-click on the icon in the Quick Launch Bar of the application, folder, or file you want to remove and right-click it, click Delete, and then click Yes when asked if you’re sure you want to delete the shortcut. Note: Although the shortcut is removed from the Quick Launch Bar, the actual application, folder, or file has not been deleted from your computer.
5. Arrange windows on your desktop

In Windows, you can arrange windows side by side, which can be especially helpful when comparing two documents or when moving files from one place to another. Note: If you’re using a nonstandard setup (such as dual monitors), the tricks below may not work as expected.
Windows 7

Drag the title bar of a window to the left or right side of the screen until an outline of the expanded window appears.

Release the mouse to expand the window.

Repeat steps 1 and 2 with another window to arrange the windows side by side.

To return a window to its original size click the Maximize button in the window’s title bar and the window expands to full size.
The Maximize button

The Maximize button

Learn more about managing multiple windows in Windows 7.

Tip: To snap an active window to the side of the desktop by using the keyboard, press Windows logo key Windows logo key +Left Arrow or Windows logo key Windows logo key +Right Arrow.
Viewing windows side by side in Windows

Viewing windows side by side in Windows
Windows Vista and Windows XP

In Windows Vista and Windows XP, it’s easy to display any two (or more) windows side by side on the desktop, all equally sized. Press and hold the Ctrl key and click two or more of the window buttons on the taskbar that you want to open. Release the Ctrl key, right-click, and then do one of the following:

Windows Vista users, click Show Windows Side by Side.

Read More

Tips to Solve Uncommon Windows Error Messages

Tips to Solve Uncommon Windows Error Messages

While working on your Windows PC you may come across several common and uncommon computer errors, such as Windows XP Stop 0×0000001E Error and WMP.dll Error Message. These errors may occur when certain conditions on your PC are true.

Discussed in this article are a few steps that you can perform to resolve such computer errors:

Free Up Disk Space

These days, despite having hard disks with a large amount storage space, it does not take long to fill it up. This happens because with the increase in disk space, the space requirements for different software programs and different types of files have also increased. Listed below are some of the tasks that you can perform to free up disk space:

Use Add or Remove Programs or a good third-party program uninstaller to uninstall unwanted programs.
Use the Disk Cleanup utility to get rid of unwanted temporary files, programs setup files, and old system restore points.
Use the Disk Defragmenter tool to consolidate fragmented files and make your data contiguous.

Remove Faulty Programs and Device Drivers

Errors, such as Windows XP Stop 0×0000001E error are known to occur due to problems with a device driver or program. Usually, the name of the faulty device driver or program file appears in the error message. In case this happens, you may perform one of the following tasks to resolve the error:

Use Device Manager or Add or Remove Programs (whichever applies) utility to uninstall the faulty device driver or faulty program reported in the error message.
Visit the device or program manufacturer web site to check if any updates for the software are available—if you find an update, install it to resolve the error.

Update Your System

Several software error messages, such as WMP.dll error message are displayed due to the existence of old versions of program files. To prevent errors such as these, you must always keep your operating system, software programs, and device drivers updated with the latest service packs and security releases. Windows operating systems and many programs and drivers comprise the automatic update feature. You should keep this feature enabled to ensure that the software on your system always stays updated. This will not only help prevent compatibility related errors, but also prevent infections from malware programs that are built around these security lapses.

Scan and Repair the Windows Registry

Computer problems can also occur due to registry bloating. Registry bloating occurs when a large amount of unwanted, obsolete, and invalid entries accumulate within the registry. When the registry bloats up, it becomes unstable and starts generating computer errors. To prevent computer errors due to registry problems, you must regularly scan and repair your registry. As it is difficult to perform manual scan and clean up of the complex registry files, you may use a reliable third-party registry tool to perform the task.

Scan and Remove Malware

Malware programs, such as virus, Trojans, and spyware can generate several computer problems. Two tools that are essential to combat these malicious programs are antivirus and antispyware tools. You must obtain and install these tools on your computer. Additionally, always keep the tools updated with the latest virus database and schedule them to perform full system scans on a regular basis to ensure that your PC remains free of malicious information at all times.

Read More

Microsoft Tricks - Really Amazing - Please Try

i tried it, They work !!!

TRICK #1
An Indian discovered that nobody can create a FOLDER
anywhere on the computer which can be named as “CON”.
This is something pretty cool and unbelievable.
At Microsoft the whole Team, couldn't answer why this happened!
TRY IT NOW ,IT WILL NOT CREATE "CON" FOLDER

———— ——— ——— ——— ——— ——— ——— ——— —–

TRICK #2
For those of you using Windows, do the following:

1.) Open an empty notepad file
2.) Type "Bush hid the facts" (without the quotes)
3.) Save it as whatever you want.
4.) Close it, and re-open it.

is it just a really weird bug? Confused?

———— ——— ——— ——— ——— ——— ——— ——— —–

TRICK #3
Microsoft crazy facts

This is something pretty cool and neat and
unbelievable. At Microsoft the whole Team,
including Bill Gates, couldn't answer why this
happened!

It was discovered by a Brazilian. Try it out
yourself

Open Microsoft Word and type

=rand (200, 99)

And then press ENTER

Enjoy

Read More

Create your own shutdown timer

Windows DOS has a shutdown command which can be used as a shutdown timer, as per our time requirements. It can be used for other functions like Logging off, Restarting etc.

Another pranky feature of this commend is, it allows you to shutdown remote computers. But remember, the remote computer you are trying to shutdown should be running with administrative privileges or the remote shutdown facility should not have been disabled.

Syntax:
shutdown -s -t "number of seconds to shutdown" (without quotes)

Example:
shutdown -s -t 120
[This will shutdown your computer within 120 seconds]

To shutdown a remote computer which is present on the same network enter shutdown -s -m 192.168.1.10 -t 100.

To abort a scheduled shutdown enter shutdown -a


The -s parameter in the command specifies that it is going to shutdown the computer. Likewise you can use -r option to restart and -l to logoff.

Type shutdown /help to see a list of options that you can use with shutdown command for different purposes.

Hint:
Type shutdown -i to get a GUI window to do your task easily.

Read More

Recover Microsoft Word Passwords with Word Password Recovery

Everyone use Microsoft Word either student or professional. There has an option for used to protect their files with password to prevent it from opening or editing. Unfortunately if we forgotten our password. We might lost our important word doc file. Thanks to Word Password Recovery.

This app let you search for passwords of protected Word documents. This program guarantees the most complicated Word passwords recovery. Word Password Recovery allows searching for the password of the protected Word using Brute Force algorithm.

It can be used by both a normal user who has forgotten his/her password or even forensic engineers.

Features;

* Recovers user password required to open the file
* Brute-Force algorithm are used to recover the password
* The exe in the installation directory is portable
* With an elegant GUI the user can set the parameters easily before starting the recovery process

You just need to select the file and also specify the password length and the app will recover the password for you.

Related: Recover Lost or Forgotten passwords of PDF files.

Download Word Password Recovery

Read More